Thank you for visiting our booth at the SPS trade fair in Nuremberg.
Through the presentation of various product applications from a wide range of materials and technologies, you were able to gain an impression of our capabilities.
Thank you for your visit at our booth at the SPS in Nuremberg, Germany.
Through the presentation of different product applications and a mix of materials and technologies you have achieved an impression about POLYRACK's capabilities.
Thank you for your visit at our booth at the SPS in Nuremberg, Germany.
Through the presentation of different product applications and a mix of materials and technologies you have achieved an impression about POLYRACK's capabilities.
POLYRACK congratulates KTV Straubenhardt to the title in the German Artistic Gymnastics League
In the league final last Saturday in the Ludwigsburg MHP Arena, the Bundesliga team of the KTV Straubenhardt fully achieved the set season goal of bringing the now seventh championship to Straubenhardt with a terrific team performance. In the literal "heartbeat final", the team around coach Steve Woitalla secured the German Team Championship 2019 with a 29:27 against TG Saar and now adds the seventh star to the club logo with the title win.
"I am very proud of our team, whose fighting spirit and team spirit enabled them to successfully complete this difficult season despite bad luck due to injuries," said a delighted Steve Woitalla, sporting director of KTV Straubenhardt. Andreas Rapp, president of the KTV Straubenhardt sponsors' association and managing director of the main sponsor, POLYRACK TECH-GROUP Holding GmbH & Co. KG: "The treble was already a mega experience, but we didn't expect to win the title in this year's final. The boys showed great morale. The team will largely stay together in the coming season. We can once again look forward to top-class gymnastics in Straubenhardt in 2020."
A very big thank you at this point goes to all sponsors, friends and supporters, as well as to the hardworking helpers and supporters, without whom such a performance would not be possible. For the important mental support the gymnasts could rely on their loyal fans as always. Many thanks to them as well.
The Bundesliga squad of KTV Straubenhardt in the 2019 season included: David Belyavskiy, Pascal Brendel, Andreas Bretschneider, Nils Dunkel, Brian Gladow, Lucas Herrmann, Nick Klessing, Alexander Maier, Marcel Nguyen, Tobias Radoi, Ivan Rittschik and Daniel Wörz.
Sorry, there is no translation for this news-article.
Désolé, il n'y a pas de traduction pour cet article
From 26 to 28 November 2019 at SPS in Nuremberg (Hall 3C, Stand 531), POLYRACK TECH-GROUP will be presenting a wide range of enclosure systems as well as customer-specific system applications from various industries and areas of use, including electronics integration and a selection of HMI and MMI applications.
Make a note of this date right away!
You can view the press release here.
The POLYRACK TECH-GROUP will be presenting their wide range of case and system solutions from November 26th to 28th 2019 at the SPS in Nuremberg (Hall 3C, Booth 531). Customer-specific system applications from various branches and application fields including integration of electronics and a range of HMI and MMI applications will be displayed.
Save the Date and read the complete press release here!
The POLYRACK TECH-GROUP will be presenting their wide range of case and system solutions from November 26th to 28th 2019 at the SPS in Nuremberg (Hall 3C, Booth 531). Customer-specific system applications from various branches and application fields including integration of electronics and a range of HMI and MMI applications will be displayed.
Save the Date and read the complete press release here!
From 26 to 28 November 2019 at SPS in Nuremberg (Hall 3C, Stand 531), POLYRACK TECH-GROUP will be presenting a wide range of enclosure systems as well as customer-specific system applications from various industries and areas of use, including electronics integration and a selection of HMI and MMI applications.
For control and drive technology, especially for industrial environments, POLYRACK presents the PanelPC 2 series. These panel PC solutions with IP54 protection are available in sizes ranging from 10.1'' to 21.5'' and in different material variants from milled aluminum to sheet metal bending solutions. Resistive single-touch or multi-touch capable capacitive touchscreens (PCAP) in different glass thicknesses are available as user interfaces. For example, operating concepts with gesture control can also be projected for smart production. Customized printing and anti-fingerprint coatings are available on request. In order to exploit the advantages of different materials, customers can also choose from other technologies for the realization of individual requirements, such as plastic and cast iron - also in material combinations.
Small Form Factor with EmbedTEC: The aluminum desktop case is the elegant package for small form factors like embedded NUC (eNUC), pico-ITX (pITX, 2.5"), SMARC, QSeven and SBCs like the Raspberry Pi. It features a replaceable I/O shield and a solid aluminum lid for heat dissipation. For higher performance, this can be replaced with a heatsink, and perforated side panels and fans further increase cooling performance if required. For applications in the field of automation and IoT, POLYRACK also offers a wide range of adaptations and mounting options.
Other enclosure series such as SmarTEC for high-quality systems such as passively cooled mini PCs, EmbedTEC for embedded computing and HMI applications, and backplanes for the high-speed sector with the VPX and CompactPCI Serial standards complete the portfolio of the enclosure specialist POLYRACK. All solutions are characterized by the appropriate interaction of mechanics, plastics, electronics and the surface finish - tailored to the target market.
The POLYRACK TECH-GROUP will be presenting their wide range of case and system solutions from November 26th to 28th 2019 at the SPS in Nuremberg (Hall 3C, Booth 531). Customer-specific system applications from various branches and application fields including integration of electronics and a range of HMI and MMI applications will be displayed.
For the control and drive technology, particularly for industrial environments, POLYRACK presents its PanelPC 2-series. These Panel-PC-solutions comply with the protection class IP54 and are available in sizes from 10.1" to 21.5" as well as in different materials such as milled aluminum or sheet metal bending solutions. Resistive single-touch or multi-touch capable touchscreens (PCAP) in different glass thicknesses are options for the user interface. For example operating concepts with gesture control may be projected for smart production operating as well. Customer specific printing and anti-fingerprint coating are available on request. In order to use the advantages of different materials, other technologies are available for customers to realize individual requirements in materials, such as plastics and cast components - also in a material combination.
Small Form Factor with EmbedTEC: The aluminum desktop case is the elegant design for small form factors such as embedded NUC (eNUC), pico-ITX (pITX, 2.5"), SMARC, QSeven and SBCs as well as the Raspberry Pi. It comes with a changeable front I/OShield as well as a massive aluminum cover for the heat dissipation. The cover might as well be replaced by a heat sink for improved performance. Alternatively, perforated side panels or small fans can add to the cooling performance on top. POLYRACK also offers various adaptations and mounting options for applications in the fields of automation and IoT.
Supporting enclosure series like SmarTEC for high quality systems such as passive cooled Mini-PCs, EmbedTEC for Embedded Computing and HMI-applications as well as Backplanes for the high-speed domain based on VPX and CompactPCI serial standards are complementary to the product portfolio of the electronic packaging specialist POLYRACK. All solutions are characterized by matching interaction of mechanics, plastics, electronics and surface finish - fine-tuned to the target market.
The POLYRACK TECH-GROUP will be presenting their wide range of case and system solutions from November 26th to 28th 2019 at the SPS in Nuremberg (Hall 3C, Booth 531). Customer-specific system applications from various branches and application fields including integration of electronics and a range of HMI and MMI applications will be displayed.
For the control and drive technology, particularly for industrial environments, POLYRACK presents its PanelPC 2-series. These Panel-PC-solutions comply with the protection class IP54 and are available in sizes from 10.1" to 21.5" as well as in different materials such as milled aluminum or sheet metal bending solutions. Resistive single-touch or multi-touch capable touchscreens (PCAP) in different glass thicknesses are options for the user interface. For example operating concepts with gesture control may be projected for smart production operating as well. Customer specific printing and anti-fingerprint coating are available on request. In order to use the advantages of different materials, other technologies are available for customers to realize individual requirements in materials, such as plastics and cast components - also in a material combination.
Small Form Factor with EmbedTEC: The aluminum desktop case is the elegant design for small form factors such as embedded NUC (eNUC), pico-ITX (pITX, 2.5"), SMARC, QSeven and SBCs as well as the Raspberry Pi. It comes with a changeable front I/OShield as well as a massive aluminum cover for the heat dissipation. The cover might as well be replaced by a heat sink for improved performance. Alternatively, perforated side panels or small fans can add to the cooling performance on top. POLYRACK also offers various adaptations and mounting options for applications in the fields of automation and IoT.
Supporting enclosure series like SmarTEC for high quality systems such as passive cooled Mini-PCs, EmbedTEC for Embedded Computing and HMI-applications as well as Backplanes for the high-speed domain based on VPX and CompactPCI serial standards are complementary to the product portfolio of the electronic packaging specialist POLYRACK. All solutions are characterized by matching interaction of mechanics, plastics, electronics and surface finish - fine-tuned to the target market.
Straubenhardt, September 17, 2019 - POLYRACK TECH-GROUP, an internationally active family business and provider of high-quality system solutions, acquired Metalle in Form Geräteteile GmbH, Karlsruhe, by way of a share deal on September 12, 2019.
With around 30 employees, Metalle in Form covers a range of services including design support, sheet metal processing, device assembly and contract manufacturing of individual parts or drawing parts, assemblies and functional units for sophisticated device construction. "Metalle in Form's portfolio is a perfect fit for the POLYRACK Group. By taking over their know-how and CNC machinery, we can expand our capacities at short notice, further shorten response times and implement projects even faster," explains Andreas Rapp, CEO and owner of POLYRACK TECH-GROUP.
"All jobs will be retained on site. In future, we will not only be a reliable partner for the employees, but also for the customers of Metalle in Form - as the customers and employees of POLYRACK know," adds Horst Rapp, CEO, owner and company founder of POLYRACK TECH-GROUP.
Metalle in Form Geräteteile GmbH will retain its current structure and will continue to operate under the same name and company name as a subsidiary of POLYRACK Electronic-Aufbausysteme GmbH. The group of companies also includes RAPP Kunststofftechnik GmbH and RAPP Oberflächenbearbeitung GmbH as well as subsidiaries in Switzerland, Belgium, America and China.
Andreas Rapp, CEO and owner of POLYRACK TECH-GROUP, and Uwe Günthner, Technical Managing Director of POLYRACK TECH-GROUP, will take over the management of Metalle in Form.
A decisive factor for the takeover was also the spatial proximity of Metalle in Form in Karlsruhe and the POLYRACK Group's production site in Ettlingen (near Karlsruhe). Here, POLYRACK is currently expanding manufacturing by approx. 1,500m2 of production space. The aim is to centralize and expand the mechanical production in order to further homogenize the processes and to offer customers a technologically high level also in the future.
You can view the press release as PDF here!
Straubenhardt, September 17, 2019 - The internationally operating family-owned POLYRACK TECH-GROUP and supplier of high quality system solutions took over the company Metalle in Form GmbH (Karlsruhe) on September 12, 2019 by a Share Deal.
Metalle in Form employs approx. 30 people and offers a range of services including the support of engineering tasks, sheet metal processing, unit assembly as well as contract manufacturing of individual parts and items made to drawing, modules and functional units for sophisticated equipment. "The portfolio of Metalle in Form is a perfect fit for the POLYRACK Group. We can increase our capacity on short term with the transfer of their know-how and CNC operations, reduce the reaction times and realise projects even faster", explains Andreas Rapp, CEO and owner of the POLYRACK TECH-GROUP.
"All positions are maintained at the location in Karlsruhe. We will stay a reliable partner for all employees and particularly the customers of Metalle in Form in the future - exactly the way customers and employees of POLYRACK already know it", adds Horst Rapp, CEO, owner and founder of the POLYRACK TECH-GROUP.
The present organization of Metalle in Form Geräteteile GmbH will remain and it will be listed as a subsidiary of POLYRACK Electronic-Aufbausysteme GmbH under the existing name. The group of companies include the RAPP Kunststofftechnik GmbH, RAPP Oberflächenbearbeitung GmbH as well as the subsidiaries in Belgium, China, Switzerland and the United States of America.
Andreas Rapp, CEO and owner of the POLYRACK TECH-GROUP as well as Uwe Günthner, CTO of POLYRACK TECH-GROUP will constitute the General Management of Metalle in Form.
A decisive factor of the aquisition was the geographical proximity of Metalle in Form located in Karlsruhe and the production site in Ettlingen of the Polyrack Group (close by to Karlsruhe). In Ettlingen POLYRACK is also expanding the production floor with approx. 1,500 m2 in space. The aim is to centralize and expand the mechanical production and to homogenize the processes in order to maintain a high technological level for our customers in the future.
Straubenhardt, September 17, 2019 - The internationally operating family-owned POLYRACK TECH-GROUP and supplier of high quality system solutions took over the company Metalle in Form GmbH (Karlsruhe) on September 12, 2019 by a Share Deal.
Metalle in Form employs approx. 30 people and offers a range of services including the support of engineering tasks, sheet metal processing, unit assembly as well as contract manufacturing of individual parts and items made to drawing, modules and functional units for sophisticated equipment. "The portfolio of Metalle in Form is a perfect fit for the POLYRACK Group. We can increase our capacity on short term with the transfer of their know-how and CNC operations, reduce the reaction times and realise projects even faster", explains Andreas Rapp, CEO and owner of the POLYRACK TECH-GROUP.
"All positions are maintained at the location in Karlsruhe. We will stay a reliable partner for all employees and particularly the customers of Metalle in Form in the future - exactly the way customers and employees of POLYRACK already know it", adds Horst Rapp, CEO, owner and founder of the POLYRACK TECH-GROUP.
The present organization of Metalle in Form Geräteteile GmbH will remain and it will be listed as a subsidiary of POLYRACK Electronic-Aufbausysteme GmbH under the existing name. The group of companies include the RAPP Kunststofftechnik GmbH, RAPP Oberflächenbearbeitung GmbH as well as the subsidiaries in Belgium, China, Switzerland and the United States of America.
Andreas Rapp, CEO and owner of the POLYRACK TECH-GROUP as well as Uwe Günthner, CTO of POLYRACK TECH-GROUP will constitute the General Management of Metalle in Form.
A decisive factor of the aquisition was the geographical proximity of Metalle in Form located in Karlsruhe and the production site in Ettlingen of the Polyrack Group (close by to Karlsruhe). In Ettlingen POLYRACK is also expanding the production floor with approx. 1,500 m2 in space. The aim is to centralize and expand the mechanical production and to homogenize the processes in order to maintain a high technological level for our customers in the future.
Straubenhardt, September 17, 2019 - POLYRACK TECH-GROUP, an internationally active family business and provider of high-quality system solutions, acquired Metalle in Form Geräteteile GmbH, Karlsruhe, by way of a share deal on September 12, 2019.
With around 30 employees, Metalle in Form covers a range of services including design support, sheet metal processing, device assembly and contract manufacturing of individual parts or drawing parts, assemblies and functional units for sophisticated device construction. "Metalle in Form's portfolio is a perfect fit for the POLYRACK Group. By taking over their know-how and CNC machinery, we can expand our capacities at short notice, further shorten response times and implement projects even faster," explains Andreas Rapp, CEO and owner of POLYRACK TECH-GROUP.
"All jobs will be retained on site. In future, we will not only be a reliable partner for the employees, but also for the customers of Metalle in Form - as the customers and employees of POLYRACK know," adds Horst Rapp, CEO, owner and company founder of POLYRACK TECH-GROUP.
Metalle in Form Geräteteile GmbH will retain its current structure and will continue to operate under the same name and company name as a subsidiary of POLYRACK Electronic-Aufbausysteme GmbH. The group of companies also includes RAPP Kunststofftechnik GmbH and RAPP Oberflächenbearbeitung GmbH as well as subsidiaries in Switzerland, Belgium, America and China.
Andreas Rapp, CEO and owner of POLYRACK TECH-GROUP, and Uwe Günthner, Technical Managing Director of POLYRACK TECH-GROUP, will take over the management of Metalle in Form.
A decisive factor for the takeover was also the spatial proximity of Metalle in Form in Karlsruhe and the POLYRACK Group's production site in Ettlingen (near Karlsruhe). Here, POLYRACK is currently expanding manufacturing by approx. 1,500m2 of production space. The aim is to centralize and expand the mechanical production in order to further homogenize the processes and to offer customers a technologically high level also in the future.
You can view the press release as PDF here!
Straubenhardt, September 17, 2019 - The internationally operating family-owned POLYRACK TECH-GROUP and supplier of high quality system solutions took over the company Metalle in Form GmbH (Karlsruhe) on September 12, 2019 by a Share Deal.
Metalle in Form employs approx. 30 people and offers a range of services including the support of engineering tasks, sheet metal processing, unit assembly as well as contract manufacturing of individual parts and items made to drawing, modules and functional units for sophisticated equipment. "The portfolio of Metalle in Form is a perfect fit for the POLYRACK Group. We can increase our capacity on short term with the transfer of their know-how and CNC operations, reduce the reaction times and realise projects even faster", explains Andreas Rapp, CEO and owner of the POLYRACK TECH-GROUP.
"All positions are maintained at the location in Karlsruhe. We will stay a reliable partner for all employees and particularly the customers of Metalle in Form in the future - exactly the way customers and employees of POLYRACK already know it", adds Horst Rapp, CEO, owner and founder of the POLYRACK TECH-GROUP.
The present organization of Metalle in Form Geräteteile GmbH will remain and it will be listed as a subsidiary of POLYRACK Electronic-Aufbausysteme GmbH under the existing name. The group of companies include the RAPP Kunststofftechnik GmbH, RAPP Oberflächenbearbeitung GmbH as well as the subsidiaries in Belgium, China, Switzerland and the United States of America.
Andreas Rapp, CEO and owner of the POLYRACK TECH-GROUP as well as Uwe Günthner, CTO of POLYRACK TECH-GROUP will constitute the General Management of Metalle in Form.
A decisive factor of the aquisition was the geographical proximity of Metalle in Form located in Karlsruhe and the production site in Ettlingen of the Polyrack Group (close by to Karlsruhe). In Ettlingen POLYRACK is also expanding the production floor with approx. 1,500 m2 in space. The aim is to centralize and expand the mechanical production and to homogenize the processes in order to maintain a high technological level for our customers in the future.
Straubenhardt, September 17, 2019 - The internationally operating family-owned POLYRACK TECH-GROUP and supplier of high quality system solutions took over the company Metalle in Form GmbH (Karlsruhe) on September 12, 2019 by a Share Deal.
Metalle in Form employs approx. 30 people and offers a range of services including the support of engineering tasks, sheet metal processing, unit assembly as well as contract manufacturing of individual parts and items made to drawing, modules and functional units for sophisticated equipment. "The portfolio of Metalle in Form is a perfect fit for the POLYRACK Group. We can increase our capacity on short term with the transfer of their know-how and CNC operations, reduce the reaction times and realise projects even faster", explains Andreas Rapp, CEO and owner of the POLYRACK TECH-GROUP.
"All positions are maintained at the location in Karlsruhe. We will stay a reliable partner for all employees and particularly the customers of Metalle in Form in the future - exactly the way customers and employees of POLYRACK already know it", adds Horst Rapp, CEO, owner and founder of the POLYRACK TECH-GROUP.
The present organization of Metalle in Form Geräteteile GmbH will remain and it will be listed as a subsidiary of POLYRACK Electronic-Aufbausysteme GmbH under the existing name. The group of companies include the RAPP Kunststofftechnik GmbH, RAPP Oberflächenbearbeitung GmbH as well as the subsidiaries in Belgium, China, Switzerland and the United States of America.
Andreas Rapp, CEO and owner of the POLYRACK TECH-GROUP as well as Uwe Günthner, CTO of POLYRACK TECH-GROUP will constitute the General Management of Metalle in Form.
A decisive factor of the aquisition was the geographical proximity of Metalle in Form located in Karlsruhe and the production site in Ettlingen of the Polyrack Group (close by to Karlsruhe). In Ettlingen POLYRACK is also expanding the production floor with approx. 1,500 m2 in space. The aim is to centralize and expand the mechanical production and to homogenize the processes in order to maintain a high technological level for our customers in the future.
